CB711-95 Spek Anchor 100KG-26000KG

 The Spek anchor is a stockless traditional anchor and still very popular. The Spek anchor is a balanced type and specially designed to fit anchor pockets on modern ships. The weight range available is between 100kg and 26000kg. Spek anchors are generally supplied with certificates and these can be from any of the major classification societies.

Features of CB711-95 Spek Anchor 100KG-26000KG:

• Large grasping force: this is the most basic performance requirement. The characteristic value to measure the holding performance of Marine anchor is usually called the holding force coefficient. The anchor’s holding coefficient is equal to the anchor’s holding force in the subsoil divided by the anchor’s mass in the air. As a rule, the greater the weight of the anchor, the greater its holding power; However, the holding force coefficient of most anchors decreases with the increase of their mass. Therefore, full attention should be paid to this characteristic when determining the holding force of anchors.
• Can adapt to a variety of different bottom quality: general ships due to the vast sailing area, the bottom quality situation changes greatly, so the configuration of the anchor type requirements can adapt to a variety of bottom quality.
• Strong structure: the ship may bear a variety of complex loads in the process of anchoring, hoisting and tying, so the structure of the anchor should be strong to ensure its safe use.
• Good stability, easy to soil: the ship in the anchoring process, due to the change of the wind direction and flow of the ship around the anchor point rotation, uneven bottom material makes the anchor jaw uneven force, resulting in the anchor turned over and was pulled out of the bottom soil, so good stability is very important for the anchor. Usually the anchor with transverse bar is more stable, but it will make the anchors inconvenient to collect. Under certain circumstances, such as a ship turning or a sudden increase in load, the anchor may still be pulled out of the subsoil, so it is required to have the characteristic of re-burrowing into the subsoil.

Photos of CB711-95 Spek Anchor 100KG-26000KG:

Specification of Pool HHP Anchor Type 12KG-20625KG: